Jon Reed Jon Reed's Profile Page

Jon Reed Jon Reed

0 Course Enrolled • 0 Course Completed

Biography

Reliable JN0-664 Test Preparation | Valid JN0-664 Exam Pass4sure

P.S. Free & New JN0-664 dumps are available on Google Drive shared by ExamsReviews: https://drive.google.com/open?id=1ILTlB7FuzFy5tccXczKBn-1JWX96LJx1

The web-based JN0-664 practice exam is similar to the desktop-based software. You can take the web-based JN0-664 practice exam on any browser without needing to install separate software. In addition, all operating systems also support this web-based Juniper JN0-664 Practice Exam. Both Service Provider, Professional (JNCIP-SP) practice exams track your performance and help to overcome mistakes. Furthermore, you can customize your Service Provider, Professional (JNCIP-SP) practice exams according to your needs.

To be eligible for the Juniper JN0-664 certification exam, candidates must have a valid JNCIA-Junos certification or equivalent knowledge, and have at least one year of experience working with Juniper Networks service provider routing and switching technologies. Service Provider, Professional (JNCIP-SP) certification exam covers a wide range of topics, including advanced routing and switching technologies, MPLS, VPNs, QoS, and multicast protocols.

Juniper JN0-664 Exam covers a wide range of topics related to Service Provider Routing and Switching. It includes areas such as OSPF, BGP, MPLS, Layer 2 and Layer 3 VPNs, multicast, and more. Candidates who take JN0-664 exam are expected to have a solid understanding of these topics and their practical applications.

>> Reliable JN0-664 Test Preparation <<

Juniper - Latest Reliable JN0-664 Test Preparation

The Service Provider, Professional (JNCIP-SP) (JN0-664) Exam Questions offered by ExamsReviews provide you with a good idea of what you can expect in the JN0-664 exam from Juniper. All the JN0-664 exam topics and objectives are well covered by our product. Thus, ExamsReviews Juniper JN0-664 Practice Questions are considered a very good resource that will help you in your practicing by focusing on your weak points and strengthening them to easily pass the JN0-664 exam.

Juniper JN0-664 exam is an essential certification for IT professionals who want to demonstrate their expertise in service provider routing and switching. JN0-664 exam is challenging and requires a solid understanding of Juniper Networks' service provider routing and switching platforms. However, with the right preparation and resources, candidates can successfully pass the JN0-664 Exam and become certified professionals in service provider routing and switching.

Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q35-Q40):

NEW QUESTION # 35
You must ensure that the VPN backbone is preferred over the back door intra-area link as long as the VPN is available.
Referring to the exhibit, which action will accomplish this task?

A. Create an OSPF sham link between the PE routers.
B. Configure the OSPF metric on the backup intra-area link that is higher than the L3VPN link.
C. Configure an import routing policy on the CE routers that rejects OSPF routes learned on the backup intra-area link.
D. Enable OSPF traffic-engineering.

Answer: A

NEW QUESTION # 36
Exhibit

Referring to the exhibit, PIM-SM is configured on all routers, and Anycast-RP with Anycast-PIM is used for the discovery mechanism on RP1 and RP2. The interface metric values are shown for the OSPF area.
In this scenario, which two statements are correct about which RP is used? (Choose two.)

A. Source2 will use RP2 and Receiver2 will use RP2 for group 224.2.2.2.
B. Source1 will use RP1 and Receiver1 will use RP2 for group 224.1 1 1
C. Source2 will use RP1 and Receiver2 will use RP1 for group 224.2.2.2.
D. Source1 will use RP1 and Receiver1 will use RP1 for group 224.1.1.1.

Answer: A,D

Explanation:
A sham link is a logical link between two PE routers that belong to the same OSPF area but are connected through an L3VPN. A sham link makes the PE routers appear as if they are directly connected, and prevents OSPF from preferring an intra-area back door link over the VPN backbone. A sham link creates an OSPF multihop neighborship between the PE routers using TCP port 646. The PEs exchange Type 1 OSPF LSAs instead of Type 3 OSPF LSAs for the L3VPN routes, which allows OSPF to use the correct metric for route selection1.

NEW QUESTION # 37
The network shown in the exhibit is based on IS-IS.

Which statement is correct in this scenario?

A. The NSEL byte for Area 0001 is 00.
B. The area address is two bytes.
C. The routers are using unnumbered interfaces.
D. The system ID of R1_2 is 192.168.16.1.

Answer: A

NEW QUESTION # 38
You are responding to an RFP for a new MPLS VPN implementation. The solution must use LDP for signaling and support Layer 2 connectivity without using BGP The solution must be scalable and support multiple VPN connections over a single MPLS LSP The customer wants to maintain all routing for their Private network In this scenario, which solution do you propose?

A. LDP Layer 2 circuit
B. BGP Layer 2 VPN
C. circuit cross-connect
D. translational cross-connect

Answer: A

Explanation:
AToM (Any Transport over MPLS) is a framework that supports various Layer 2 transport types over an MPLS network core. One of the transport types supported by AToM is LDP Layer 2 circuit, which is a point-to-point Layer 2 connection that uses LDP for signaling and MPLS for forwarding. LDP Layer 2 circuit can support Layer 2 connectivity without using BGP and can be scalable and efficient by using a single MPLS LSP for multiple VPN connections. The customer can maintain all routing for their private network by using their own CE switches.

NEW QUESTION # 39
You are examining an L3VPN route that includes the information shown in the exhibit.
Which statement is correct in this scenario?

A. The information shows a Type 1 route distinguisher.
B. The information shows a Type 0 route distinguisher.
C. The information shows a Type 2 route distinguisher.
D. The information shows a route target.

Answer: A

Explanation:
Type 1: When Type value is 1, the Administrator field is 4-bytes and Assigned Number field is 2- bytes.
The Administrator field should be set to the IP address (public IP addresses should be used). The Assigned Number field contains a number from a numbering space that is administered by the enterprise to which the IP address has been assigned by the appropriate authority.

NEW QUESTION # 40
......

Valid JN0-664 Exam Pass4sure: https://www.examsreviews.com/JN0-664-pass4sure-exam-review.html

DOWNLOAD the newest ExamsReviews JN0-664 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1ILTlB7FuzFy5tccXczKBn-1JWX96LJx1

Jon Reed Jon Reed

Biography

Support